Application of Acrel Smart Control Device in Shanghai Tesla Factory Distribution Project 

0.背景 Background

2018年10月17日，上海市臨港管委會表示，特斯拉（上海）有限公司已成功摘得上海臨港裝備產業區Q01-05地塊864885平方米（合計1297.32畝）的工業用地。2019年1月7日，位于上海東南一角的兩港西大道與正嘉路交叉口，特斯拉工廠一期宣布開工建設。按照規劃，該工廠一期年產能為25萬輛純電動整車，包括Model 3等系列車型。2019年3月，特斯拉工廠一期工程建設敲定上海本土建設企業——上海建工集團。特斯拉工廠是上海的外資制造業項目，也是特斯拉在美國之外的工廠，2019年1月開工建設。

October 17th, 2018, Shanghai Lin-Gang management committee confirmed the Tesla (Shanghai) Co., LTD has successfully won the land mass Q01-05 l,   864885 m² of industrial land. On January 7th, 2019, first step construction of Tesla factory was announced at the intersection of LiangGang West Avenue and ZhengJia Road, located in the southeast corner of Shanghai. The plant is scheduled to have an annual capacity of 250, 000 electric vehicles at the first step, including models such as the Model 3. In March 2019, the first step of Tesla factory construction was finalized as Shanghai Construction Engineering Group, a local construction company in Shanghai. The Shanghai factory is Tesla's another factory besides the United States and will start construction in January 2019.

1.概述 Overview

本項目為特斯拉上海臨港工廠二期工程,該項目配電工程有3個配電房，包括能源中心C2，聯合廠房4以及變電站進線隔離柜，共60面10kV高壓柜。

This project is the second step of Tesla's Shanghai Lingang Factory. This project includes 3 distribution rooms, including energy center C2, union workshop 4 and substation incoming isolation cabinets, with totally 60 sets of 10kV high voltage cabinets. 

2.產品方案 Product Solution

2.1 產品需求 Product requirements

本次針對特斯拉上海臨港工廠二期工程，需要配置智能操控裝置，對廠區內配電工程中所有高壓柜狀態進行的監測。該項目的要求如下：

1）一次動態模擬圖，帶電顯示及閉鎖； 

2）溫濕度數字控制，數碼管顯示；

3）分合閘、儲能、遠方/就地開關；

4）語音提示，人體感應；

5）柜內照明操作；

6）RS485/Modbus 通訊。

根據上述要求，故此選擇安科瑞ASD200智能操控裝置。安科瑞ASD200智能操控裝置外形結構如下： 

For the project of Tesla Shanghai Lingang factory, smart control device is required to monitor the state of all high-voltage cabinets in the power distribution cabinet in the distribution room. The requirements of the project are as follows:

1) A dynamic simulation diagram, electrical display and blocking;  

2) Temperature and humidity control, LED display;

3) Switch on and off, energy storage, remote/local switch;

4) Voice prompt and human body induction;

5) Lighting operation in the cabinet;

RS485/ Modbus communication.

In order to meet the above requirements, we choose ASD200 smart control device. The external structure of Acrel ASD200 intelligent control device is as foll